User manual of mini gum camera

        User manual of mini gum camera

1、         Product Accessories

Gum camera      USB cable     User manual CD

2、 Technical Data

  1)、Function: taking photo、video and audio、 take audio alone

   2）、Color: black silver pink orange and blue

   3）、video: AVI  680*480 resolution

   4)、photo: JPEG  1280*960 resolution

   5）、Audio: WAV

6)、Memory：SD card  1GB-8GB

   7)、USB: 2.0(Hs)

   8)、Charging time： 1.5-2.0hours

   9）、Battery use time: built-in Li Battery, 1 to 2 hours

   10)、Operating System: No need for drive installation if the operating system is windows ME/2000/XP/VISTA or above(Windows98 is excepted)

  3、Operating

   a)、Switch on

       To start the device, insert the micro-SD card, then power on the device. The blue light and red light turns on, 2 seconds later, the blue light keeps on , it comes to standby mode

b)、Recording video and audio

   Push the hold key downwards, press the record button 2 seconds, the blue light will twinkle, it starts recording video and audio at the same time.

   Press the record button again, the blue light keeps on, the camera back to standby mode and the video file is saved

c)、Taking  photos

   Understand the standby mode, push the hold key downwards, press the record button, the yellow light flash one time and then turns off, indicating one photo is taken and the camera back to standby mode

d)、Recording audio alone

   Under the standby mode ,push the hold key upwards, the yellow light twinkles, indicating the audio is recorded. Push the hold key downwards, the audio will be save ,the camera back into standby mode and the blue light will keeps on.

e)、Switch off

   Under the standby mode or recording mode, push the power off button

   Attention:  While recording ,the file cannot be saved if the power off direct.

f)、Charging

   Under the power off mode , connected the camera to the computer via USB cable and charge it. The red light keeps on ,while being charged. When the light turns off , it shows that the camera is fully charged.

   If the device of low electricity, yellow light flashes slowly.

g)、Playback  camera

   Connect the camera to computer via USB cable and play back video on computer.

   Please make sure there is playback  software in the computer before connecting.

h)、Attention

   When the device is lack of battery when taking video. The system will save the video data first, then shut down automatically.

   When taking video continually, the system will automatically generate a new video file after each operation.

   As the device has built-in high-capacity polymer lithium battery, so it has a memory effect, we advise in the first 5times of usage. Charge the battery fully and the battery is out off use, so that the battery can work with its max working hours perfectly.